Basic Info.
After-sales Service
One Year Quality Guarantee
Automatic Grade
Automatic
Product Description
Features:
1.Humanized operation interface, Windows 7 operating platform, Chinese and English switching.
2.Intelligent monitoring operation status, fault sound and light alarm, production data recording.
3.Siemens PLC + PID closed-loop control, temperature control accuracy of ±1ºC.
4.Long temperature zone design, each temperature zone reaches 300mm length.
5.The air is returned to the front and rear of the temperature zone to effectively avoid cross-temperature, and the lateral temperature difference reaches ±2°C.
6.2800RPM hot air motor, hot air flow rate up to 9OCFM, efficient heat conduction and thermal compensation capabilities.
7.Superior thermal insulation structure, shell temperature ≤30ºC, full use of energy.
8.3mm thick aluminum alloy galvanized air distribution board ensures uniform heat distribution in the temperature zone.
9.Strengthen the furnace cavity and guide rail width adjustment mechanism to effectively avoid deformation of the heated furnace cavity and guide rails.
| Machine | HR-8C | HR-10C |
| Heating zones | upper 8 zones | upper 10 zones |
| bottom 8 zones | bottom 10 zones |
| Heating tunnel | 3110mm | 3890mm |
| Dimension | L5520*1430*1530 | L6300*1430*1530 |
| Net weight | about 2760Kg | about 3060Kg |
| General power | 64KW | 83KW |
| Power consumption | Approx.7--30KW | Approx.9--38KW |
| Rising time | 20 minutes | 20 minutes |
| Controlling type | PC + PLC controlling |
| Heating method | Fully forced air convection |
| Temperature controlling | PID close-loop control, SSR drive |
| Temperature range | Ambient---300ºC |
| Temperature accurancy | ±1 ºC |
| Temperature uniform | ±1.5 ºC |
| Cooling | 3 cooling zones (top and bottom) |
| Conveyor method | Mesh belt and chain conveyor |
| Conveyor height | 900±20mm |
| Max PCB width | 400mm |
| PCB clearance | Top / Bottom 30mm |
| Conveyor direction | Left to right |
| Conveyor speed | 300-2000mm/min |
| Hook lift | Electrical screw pole |
| UP/Downstream communication | SMEMA |
| Power supply | 380v,3ph,50hz |
Temperature zone part:
- Small hot air circulation structure, hot air volume can be adjusted by computer.
- Imported high temperature resistant wind motor with air volume up to 70CFM.
- Extend the length of the temperature zone to 300mm/temperature zone
- Nickel-chromium heating wire imported from Japan
- 3mm thick electrolytic plate air distribution plate, uniform heat distribution
- Segmented heating to reduce power consumption
- Unique front and rear air return design to avoid cross-temperature
- Thermocouple wire imported from Japan
- PID closed-loop control, accuracy reaches ±1ºC
- Transverse temperature difference up to 2ºC
- Process capability CPK reaches 1.784
Installation and Calibration
1.Working environment and conditions
1.1 This equipment shall be placed on horizontal, dry and well-ventilated workshop;
1.2 Ambient temperature :5~45ºC ;
1.3 Ambient humidity: 20~95%;
1.4 Rated power supply: 380V, 100A (power wire shall be stranded wire of 16mm²), 3-phase and 5 wires system;
1.5Artificial draft system shall be installed at both ends of this equipment. The air flow of the draft tube is 25 m³/min.
2.Installation of equipment
2.1 Shall position the equipment according to the real production requirements and practical situation;
2.2 Raise the footpads of this equipment and simultaneously level this equipment by using these footpads
2.3 This equipment must be installed horizontally.
3.Calibration
All parameters of this equipment shall be adjusted in accordance with customer's requirements such as product, production rate and solder paste used. These adjustments comprise the linear speed of the chain, the temperature of each zone, etc. This equipment has been calibrated before shipment. It is only necessary to check if your power supply is applicable to this equipment when arriving at your factory.
Our Services
Services and commitments
Before buying the product, we will be a comprehensive analysis of the views and requirements and recommend it to the actual needs of customers with the most suitable products and let customers know that the performance characteristics of the selected product referred to in accordance with customers.
In purchasing the products, we promise to allow customers to clearly know the completion of the product. In strict accordance with the relevant provisions of the contract terms of production, delivery, to ensure product intact and in place within the stipulated time to customer requirements.
The company promises:
We highly value your feedback on the quality of information, all the information will be given to the quality of feedback responses;
In accordance with the contract requirements for the installation, commissioning and training of technical personnel for the buyer sold the equipment.
We provide long-term technical support, Our company has adequate supply of consumable buyer if requested to order spare parts, our company can provide timely.
FAQ
Q:How can you guarantee your sales' quality?
A:We guarantees that every set of machines are under rigorous testing before they are delivered to you, to ensure the excellent performance of all products.
Q:How is the training?
A:After buying our machines, your engineers can go to our company or it is so easy to operate
the machine according the training video and user manual,the user manual will come with the machine together.
Q: I would like to ask you if it's possible to have my logo on the product.
We hope you know that our company perfectly support customized logo service,we're do this. Besides, it's totally free,so just tell us your requirements.
Q: Is it hard to use these machines?
A: No, not hard at all. For our previous clients, at most 2 days is enough to learn to operate the machines.
Address:
15, Shangnan Hongma Road, Shajing Street, Bao′an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Company Introduction:
Shenzhen Honreal Technology Co., Ltd is a national high-tech enterprise, Specializing in SMT equipment research and development, production, and sales. Services for the world´ S top 500 electronic companies. The registered capital of the company is 5 million. Having an experienced technical team and excellent technical innovation ability, Creating a better product supply chain and service team, and meeting different customer needs is our long-term goal. We will meet customer needs by understanding customers, putting them first, and providing valuable services.
We take "honor, honest, honey, real" as our corporate culture. The quality of the company′s products is reliable, the company is honest and trustworthy, establishes a close cooperative relationship with customers, and shares glory with customers.
){kind=link}